New
ELEGOO PLA Matte Filament 1.75 mm 1 kg White
- Stock: In Stock
- Product code: 920372000001147140
- Weight Brutto: 1.20kg
- SKU: 6976021764372
18€
Ex Tax: 15€
ELEGOO PLA Matte Filament 1 kg White — matte filament with a subdued surface finish for 3D printing. The matte texture diffuses light and hides layer lines. The 1 kg spool ensures consistent printing without switching material batches. Precise filament diameter reduces the risk of nozzle clogging.
The ELEGOO PLA Matte colour range shows how the subdued palette looks on finished prints.
Key benefits
- Matte surface. The subdued texture diffuses light and hides layer lines, so the model looks uniform right after printing.
- Precise filament diameter. A tolerance of ±0.02 mm at a diameter of 1.75 mm ensures stable material feed into the extruder without pressure fluctuations.
- Cardboard spool with inspection holes. Three holes let you see the remaining filament on the ELEGOO PLA Matte Filament 1 kg White without removing the spool from the holder. Cardboard also decomposes faster than plastic.
- Wide compatibility with FDM printers. The filament prints correctly on various equipment models and configurations without additional profile setup.
- Reduced deformation during printing. The material is designed to reduce stringing, warping and shrinkage, resulting in more accurate geometric dimensions of the finished model.
Applications
- Decorative models: the matte texture of the ELEGOO PLA Matte Filament 1 kg White hides layer lines on figurines and souvenirs. As a result, the surface looks uniform without additional sanding.
- Functional prototypes: the filament diameter accuracy of ±0.02 mm ensures stable extrusion when printing parts with tight tolerances.
- Printing on various printers: the filament is compatible with a wide range of FDM printers, making it suitable for equipment fleets with different nozzles and beds.
- Small-batch series printing: reduced tendency to deform and shrink during cooling lowers the reject rate when printing several copies of a model in succession.
Printing parameters
| Drying before printing | 50 ± 5 °C for 8 h. |
| Drying before use | Recommended |
| Print bed type | Textured or smooth PEI or other plates |
| Recommended nozzle | ≥ 0.2 mm |
| Enclosed printing | Not required |
| Bed adhesive | Not required |
| Humidity during printing and storage | ≤ 20% relative humidity (sealed with a desiccant) |
| Nozzle temperature | 190 – 230 °C |
| Bed temperature | 35 – 65 °C |
| Chamber temperature | 20 – 45 °C |
| Print speed | < 300 mm/s |
Physical properties
| Density | 1.26 g/cm³ |
| Melt flow index | 9.4 ± 1.2 g/10 min. |
| Melting temperature | 163 °C |
| Vicat softening temperature | 63 °C |
| Heat deflection temperature (0.45 MPa) | 55 °C |
Mechanical properties
| Tensile strength (X-Y) | 30 ± 1 MPa |
| Tensile strength (Z) | 24 ± 3 MPa |
| Elongation at break (X-Y) | 7.9% ± 1.1% |
| Elongation at break (Z) | 6.5% ± 1.3% |
| Flexural strength (X-Y) | 75 ± 3 MPa |
| Flexural strength (Z) | 40 ± 2 MPa |
| Flexural modulus (X-Y) | 2996 ± 159 MPa |
| Flexural modulus (Z) | 2616 ± 136 MPa |
| Impact strength (X-Y) | 29.3 ± 2.9 kJ/m² |
| Impact strength (Z) | 4.5 ± 1.3 kJ/m² |
Storage and preparation
- Storage: keep the ELEGOO PLA Matte Filament 1 kg White spool in sealed packaging with a desiccant, at a relative air humidity of no more than 20%.
- Drying before printing: dry the filament at a temperature of 50 ± 5 °C for 8 h. if it has been exposed to humid air.
- Disposal: the cardboard spool decomposes faster than a plastic one, making waste sorting easier after the spool has been used.
EXPERT3D delivers throughout Spain and EU countries. Order ELEGOO PLA Matte Filament 1 kg White and other consumables on the website. We process every order promptly so that printing is never interrupted.
