Makera Cyclone Dust Collector

Makera Cyclone Dust Collector — a dust extraction system for desktop CNC routers. The device ensures continuous chip collection during milling without pauses for cleaning. Unlike household vacuum cleaners designed for short-term cleaning, it operates around the clock without motor overheating. The operator gets a clean workspace and a stable material processing workflow.

Key features and benefits

• Cyclonic separation: 97 % of large chip particles — the filter lasts three times longer, and the Makera Cyclone Dust Collector operates without frequent filter replacements during hours-long milling sessions.
• Three-stage filtration: Pre-filter + HEPA 99.99 % + carbon filter — the air in the workshop stays free of fine dust and odours even during extended material processing.
• Noise level: Maximum 70 dB — the equipment can be used in an office or classroom without headphones or complaints from colleagues.
• App control: allows you to remotely adjust suction power and turn the dust collector on or off via Wi-Fi when the unit is connected to a CNC router.
• G-code automation: starts and stops dust extraction in sync with the machining cycle, so the operator doesn't need to switch the dust collector on and off manually between operations.
• Compatibility with various materials: mills wood, metal, plastic and composites, and also works as an air purifier during laser engraving.

How the Makera Cyclone Dust Collector works

The Makera Cyclone Dust Collector combines cyclonic particle separation with multi-stage filtration, so the router operates without pauses for cleaning the work area. The two-stage system removes chips directly during workpiece processing and maintains a stable airflow in the cutting zone.

Cyclonic chip separation

The cyclonic unit uses centrifugal force to separate large chip particles and direct them straight into the dust collector. This happens before the air reaches the filters. This approach extends the filter's service life threefold and prevents clogging during hours of continuous operation.

Three-stage air filtration

Air passes through three filtration stages. The sponge pre-filter traps large dust particles. The HEPA filter (fine air filter) captures 99.99 % of fine particles. The carbon filter neutralises odours from the material being processed. The operator breathes clean air even during extended milling of composites or plastic.

Noise level during operation

The maximum noise level of the device does not exceed 70 dB, which corresponds to the volume of a normal conversation. This means the dust collector can be used at home, in an office or in a classroom without causing auditory discomfort to the operator or people nearby.

Control and automation

App control

The Makera Controller app allows you to remotely adjust suction power and turn the dust collector on or off via Wi-Fi. The function is only available when the dust collector is connected to a CNC router, so control is always tied to the actual work cycle.

G-code automation

G-code synchronises the start and stop of dust extraction with the machining cycle on the router, so the operator doesn't need to switch the dust collector on and off manually between operations. This prevents dust build-up after a project is finished and allows the machine to be left unattended.

The full cycle of connecting the dust collector to a CNC router and examples of the cyclonic system in action are shown below.

Design, power and dimensions

The 200 W motor is designed for continuous operation thanks to a cooling system that prevents overheating during hours-long milling. The compact housing, measuring 300 × 218 × 354 mm, fits neatly next to the machine and doesn't add extra hoses or tanks to the workshop.

Applications

The Makera Cyclone Dust Collector is suited to scenarios where milling continues for hours on end.

• Milling wood and composite materials: cyclonic separation intercepts large chip particles before the filter, allowing the operator to mill wood or composites for hours without stopping to clean.
• Metal and plastic processing: three-stage filtration traps fine metal and plastic dust, reducing the risk of toxic particles entering the workshop air.
• Home workshops and office spaces: a noise level no higher than that of a normal conversation allows milling at home or in the office without complaints from neighbours or colleagues.
• Classrooms and makerspaces: the activated carbon filter neutralises odours from the material being processed, which is important for spaces with children or groups of students.
• Air purification during laser engraving: the dust collector can be connected as an air purifier to a laser engraver, capturing smoke and fine particles via the HEPA and carbon filters.
• Continuous production in the workshop: the 200 W motor with cooling system supports round-the-clock operation without overheating during serial production of parts.

What's in the box?

1. Dust collection hose
2. Filter sponge
3. Data transmission cable
4. Power cable
5. User manual

Why buy the Makera Cyclone Dust Collector from EXPERT3D?

EXPERT3D has been supplying professional 3D equipment since 2012. Our specialists help you choose the optimal configuration of the Makera Cyclone Dust Collector for your specific CNC router and set up the control modes. We deliver throughout Spain and the EU countries. After purchase, we provide service support and advice on filter maintenance. Original consumables and spare parts can be ordered on our website: we deliver everything promptly so your equipment never sits idle.