- Stock: In Stock
- Product code: 920372000001514140
- Weight Brutto: 7.20kg
Ortur F20 Pro 5 W — a desktop laser engraver for wood, leather and acrylic. It gets more work done in the same amount of time thanks to its high speed. Outlines stay sharp even on fine details, such as feathers or geometric ornaments. The integrated protective enclosure and the collision alarm reduce risks during operation.
Key features and benefits
- Speed: 15 000 mm/min — A batch of items is ready sooner: that is 2.5 times faster than standard alternatives.
- Working area: 150 × 150 mm — Most standard engraving tasks fit on a single workpiece.
- Laser power: 5 W — The power is sufficient for engraving on wood and leather.
- Protective enclosure: Integrated — In the working space there is no need to worry about exposure to laser radiation.
- Collision protection: intelligent motion protection sounds an alarm and stops the operation if the device is knocked or tilted beyond the permitted range.
- Many materials: one device processes materials from wood and leather to glass and cork, so projects are not limited to a single material.
- Desktop format: the compact body fits into a studio or home office, and the engraver works right where you create your items.
Ortur F20 Pro 5 W: high engraving speed
A batch of items needs a short cycle for each workpiece. The Ortur F20 Pro 5 W works at a speed of 15 000 mm/min. That is 2.5 times faster than standard alternatives. In the same amount of time, the engraver completes a larger volume of work without any loss of quality. Output per shift increases.
Detail without blurred outlines
Complex portraits and fine patterns need crisp boundaries. The engraver reproduces feathers, geometric ornaments and portraits with sharp outlines. Blurry, low-resolution engraving is a thing of the past. Lines stay sharp.
Protection for the operator and the equipment
Laser radiation in the working space requires a physical barrier. The integrated protective enclosure covers the engraving zone, so there is no need to keep watch over the radiation. Intelligent motion protection reacts to a knock or a tilt beyond the permitted range. In that case an alarm sounds and the operation stops immediately.
Desktop format and working area
Desktop placement calls for a compact body. This device has a stylish, compact design that fits into a studio or home office. The working area is 150 × 150 mm. It is designed for standard engraving tasks. There is no information on larger-format workpieces.
One engraver for many materials
Different projects require different materials. The Ortur F20 Pro 5 W processes wood and leather. Slate and acrylic are also on the list. So are glass and cork. Metal — with a coating. The list is broad, so the range of items is not limited to a single material.
Applications
The Ortur F20 Pro 5 W is suitable for personal projects and for scaling up the production of handmade items. Desktop placement lets you keep workpieces and tools close at hand.
- Leather goods: a custom design is applied to wallets and bracelets by the 5 W laser, and the speed of 15 000 mm/min shortens the time for a small batch.
- Wooden models and puzzles: three-dimensional models, puzzles and layered compositions need clear geometry, and the sharp outlines of fine lines are preserved even on complex patterns.
- Acrylic night lights and displays: engraving on acrylic for backlit items is carried out in an area of 150 × 150 mm, which is enough for standard workpieces.
- Slate coasters and ceramic mugs: a personalised inscription or pattern is applied to slate and ceramic without changing the device for another material.
- Metal tokens and multitools: engraving is carried out on coated metal, and the integrated enclosure limits exposure to laser radiation during operation.
- Paper shadow boxes and bookmarks: a fine pattern on paper and wood requires the device to stay in a stable position; after a knock or a tilt, the operation stops immediately.
Technical specifications
Laser module and motion
| Parameter | Value |
| Laser power | 5 W |
| Operating speed | 15 000 mm/min |
| Working area | 150 × 150 mm |
Safety and materials
| Parameter | Value |
| Protective enclosure | Integrated |
| Collision and tilt protection | Automatic alarm and immediate stop of the operation |
| Materials for processing | Wood, leather, slate, acrylic, glass, coated metal, cork |
Why buy the Ortur F20 Pro 5 W from EXPERT3D?
EXPERT3D has been supplying professional 3D equipment since 2012. Our specialists provide advice before purchase and help with choosing the configuration. A consultation will help determine whether the 150 × 150 mm format suits your workpieces. We provide delivery throughout Spain and the EU countries. After purchase, we provide service support. Order spare parts and consumables on the website: we will promptly deliver everything so that your equipment does not stand idle. To order the Ortur F20 Pro 5 W, contact our specialists.
