- Stock: In Stock
- Product code: 920372000001029018
- Weight Brutto: 15.50kg
The Ortur F10 20W Laser Engraver is a diode laser system for engraving and cutting a wide range of materials. It carries a 20 W module that produces an ultra-fine spot for reproducing detailed patterns. The machine cuts dense acrylic and plywood in a single pass. A spacious work area and an aluminium-and-stainless-steel frame are built for continuous production use.
| Specification | Advantage |
|---|---|
| Work area: 400 × 3000 mm | The extended Y-axis allows large panels and signage to be processed without repositioning the material. |
| Spot size: 0.1 × 0.12 mm | The micro-spot concentrates energy on a minimal area, capturing fine engraving detail even on hard materials. |
| Single-pass cutting: 8 mm acrylic / 10 mm plywood | One pass reduces cycle time and narrows the heat-affected zone in the material. |
| Frame: 70 % aluminium, 15 % stainless steel | The rigid frame maintains axis geometry during extended sessions and prevents the accumulation of mechanical error. |
- Colour engraving of stainless steel: the laser oxidises the metal surface, producing over 380 colour shades without paint or coatings.
- Work surface protection: a retractable support plate prevents the table surface from being damaged by laser heat during cutting.
- Wide material range: the engraver processes wood, leather, ceramics, glass, rubber, bamboo and coated metal.
- USB and Wi-Fi connectivity: control via LaserGRBL, LightBurn or the proprietary ORTUR app from a mobile device.
Ortur F10 20W: Laser Module and Operating Principle
Ortur F10 20W is fitted with a 20 W diode laser module at a wavelength of 450 ± 5 nm. The fixed-focus optical system produces a spot size of 0.1 × 0.12 mm. High power density over a minimal area enables processing of materials that require substantial thermal input.
PWM (pulse-width modulation) control mode adjusts laser intensity across the S0–S1,000 range. This allows a single machine to perform both surface engraving and through-cutting without changing the tool.
Cutting and Engraving
The laser module cuts black acrylic up to 8 mm thick and plywood up to 10 mm thick in a single pass. Maximum material thickness is 15 mm; width ranges from 65 to 480 mm. Materials supported for cutting include MDF, pine, paulownia, cardboard, corrugated cardboard, dark acrylic, PVC, knitted fabric, cotton, ABS plastic, felt, leather, bamboo and silica gel.
For engraving, additional materials include pebbles, ceramics, glass, stainless steel, coated metal, electroplated metal, marble, slate, cement and brick. The laser oxidises the stainless steel surface, reproducing over 380 colour shades without additional coatings.
Construction and Design
The frame comprises 70 % aluminium, 15 % stainless steel, 5 % plastic, 5 % brass and 5 % other materials. This composition provides sufficient rigidity for operation at maximum speeds without vibrations that would affect engraving quality.
Two pressure rollers secure the material along the feed axis. This clamping is critical when engraving fine detail on long workpieces, where even slight displacement breaks image registration.
A positioning adjustment knob and alignment grid allow accurate material placement before a job is started. Four support feet stabilise the machine on a flat surface without additional fixings.
The Automatic Pin-point Setting function holds cut residues in place after cutting, preventing them from falling onto the table. A retractable support plate protects the work surface from laser heat during extended sessions.
Software and Connectivity
The device supports connection via USB and Wi-Fi. Baud rate is 115200–921600 (default: 115200). LaserGRBL (free software) is compatible with Win XP, Win 7, Win 8 and Win 10; LightBurn (paid software) supports Mac and Linux. The proprietary ORTUR app provides mobile control of engraving jobs. Supported input formats include JPG, JPEG, PNG, BMP, SVG and others.
Applications
The large work area and extensive list of compatible materials make the Ortur F10 20W suitable for a range of production tasks.
- Acrylic and plastic cutting: the 20 W output is sufficient to cut black acrylic 8 mm thick in a single pass, accelerating production of decorative panels and enclosure components.
- Wood and plywood processing: 10 mm plywood is cut in a single pass; MDF, pine and paulownia are engraved with fine detail reproduction.
- Colour metal engraving: the laser oxidises stainless steel and coated metal, producing over 380 colour shades without chemical treatment.
- Leather and textile processing: engraving and cutting of cotton, knitted fabric, felt and leather is performed without mechanical contact, eliminating deformation of soft materials.
- Signage and display production: a 400 × 3000 mm work area allows long-format workpieces for boards, signs and interior elements to be processed without repositioning.
- Marking and personalisation: engraving of ceramics, glass, marble and slate provides durable marking and personalised inscriptions.
What's in the Box
The package includes all the accessories needed for setup and operation from the first session, including an air pump, protective goggles and lens maintenance tools.
- F10 Laser Engraver — 1 pcs
- Support seat — 4 pcs
- USB data cable — 1 pcs
- Power adapter — 1 pcs
- Protective goggles — 1 pcs
- Compression optical axis — 1 pcs
- TF card — 1 pcs
- Power cable — 1 pcs
- Brush — 1 pcs
- Backlight connector support plate — 1 pcs
- Wrench — 1 pcs
- M3 × 20 mm screw — 2 pcs
- Cable ties — 10 pcs
- 2.5 mm hex key — 1 pcs
- POM block — 1 pcs
- Wi-Fi antenna — 1 pcs
- Card reader — 1 pcs
- LU3-20B laser module
- Lens replacement tool
- Thumb-screw fixing
- Air flow regulator
- Air hose (inner diameter 4 mm, outer diameter 6 mm)
- Air pump
- Quick-release fitting
- Lens
Technical specifications
Device parameters
| Parameter | Value |
| Mainboard | OLM-ESP-F10_V2.7 |
| Firmware | ESP_F10_227RC4_2411011624 |
| Frame materials | 70 % aluminium, 15 % stainless steel, 5 % plastic, 5 % brass, 5 % other |
| Engraving area | 400 × 3000 mm |
| Focus | Fixed focus |
| Control mode | PWM |
| Power level | S0–S1,000 |
| Engraving speed | 20000 mm/min |
| Input voltage | 100–240 V ~ 50/60 Hz |
| Power adapter output | 24 V / 6 A |
| Operating temperature | -5 °C – 50 °C |
Connectivity and software
| Parameter | Value |
| Baud rate | 115200–921600 (default: 115200) |
| Connection | USB / Wi-Fi |
| Computer OS | Win XP, Win 7, Win 8, Win 10 (LaserGRBL); Mac and Linux (LightBurn) |
| Control software | LaserGRBL (free), LightBurn (paid) |
| Software | ORTUR (proprietary app) / LightBurn / LaserGRBL |
| Input format | JPG, JPEG, PNG, BMP, SVG, etc. |
Laser module
| Parameter | Value |
| Laser type | 20 W laser module |
| Spot size | 0.1 × 0.12 mm |
| Wavelength | 450 ± 5 nm |
| Cutting capacity | black acrylic 8 mm, plywood 10 mm |
| Maximum speed | 20000 mm/min |
| Output voltage | 24 V / 6 A |
Materials and dimensions
| Parameter | Value |
| Cutting materials | paper, MDF, plywood, pine, paulownia, cardboard, corrugated cardboard, dark acrylic, PVC, knitted fabric, cotton, ABS plastic, felt, leather, bamboo, silica gel |
| Engraving materials | MDF, plywood, pine, paulownia, cardboard, paper, kraft paper, leather, dark acrylic, pebbles, ceramics, coated metal, electroplated metal, stainless steel, glass, knitted fabric, cotton, ABS plastic, bamboo, silica gel, rubber, ceramic tile, marble, slate, cement, brick |
| Available engraving materials | wooden board, cardboard, black acrylic, leather, food products, stainless steel, powder-coated metal, etc. |
| Available cutting materials | wooden board, cardboard, black acrylic, leather, felt, dark plastic sheets (melting), etc. |
| Maximum material width | 480 mm |
| Minimum material width | 65 mm |
| Maximum material thickness | 15 mm |
| Working area | 400 × 3000 mm (118″ × 15.75″) |
Why buy the Ortur F10 from EXPERT3D?
EXPERT3D has been supplying professional laser and 3D equipment since 2012. Our technical specialists provide expert pre-sales consultation on configuration and help define the parameters for each specific production task. As an official Ortur representative, we guarantee 100 % product authenticity and a fair price. Authorised service and the manufacturer's official warranty are included in the supply terms. After purchase, you receive service support throughout the full warranty period. We deliver across Spain and the EU. Order genuine spare parts and consumables directly from our website — we will ensure everything you need is supplied promptly, keeping your equipment in continuous operation.
