- Stock: In Stock
- Product code: 49038323319017
- Weight Brutto: 3.50kg
- SKU: R1 5W + 1.3W (1064nm)
The Ortur R1 is a foldable, Class 1-certified portable laser engraver designed for home creators, small businesses, and families, combining a 5 W blue-light module (LU3-5B) for non-metal materials and a 1.3 W 1064 nm infrared module (LR4-1A) for direct metal engraving — all in a 2.4 kg body that unfolds and starts engraving in four steps with no tools required.
| Laser Modules Included | 5 W blue-light (LU3-5B) + 1.3 W IR 1064 nm (LR4-1A) |
|---|---|
| Maximum Working Area (5 W module) | 100 × 100 mm |
| Net Weight | 2.4 kg |
| Safety Classification | Class 1 laser — enclosed enclosure |
The image below captures the Ortur R1 in its most natural role: a gift-ready package sitting at a table, delighting the people around it. The retail box includes a built-in carry handle, so it arrives presentation-ready with zero extra wrapping needed.
Four Steps from Box to First Engraving
Setup time is the single biggest barrier for first-time laser engravers. The R1 eliminates it entirely. The diagram below shows the four-stage fold-out sequence: lift the lid, rotate the gantry panel, lock the arm at 90°, and the machine is ready. No screwdrivers, no calibration ritual, no alignment jig. The entire procedure takes under a minute.
Two Laser Modules, 300+ Engravable Materials
Where most entry-level engravers pick one wavelength and stop there, the R1 ships with two interchangeable modules tuned to opposite ends of the material spectrum.
5 W Blue-Light Module (LU3-5B): Wood, Leather, Acrylic, and More
The LU3-5B module operates at 450 ± 20 nm with a compressed spot of 0.025 × 0.11 mm and a focal length of 60 mm. At up to 5,000 mm/min it engraves and cuts organic materials with clean edge definition. The image below shows representative outputs across wood, leather, MDF, fabric, and acrylic — the five material families where 450 nm blue diode lasers deliver consistent depth and contrast.
1.3 W Infrared Module (LR4-1A): Direct Metal Engraving at 1064 nm
The LR4-1A brings a 1064 nm near-infrared wavelength — the same spectral region used by fibre laser systems — in a compact module. The 1064 nm photons are absorbed directly by metallic surfaces, eliminating the need for marking spray on most bare metals. Spot size tightens to 0.03 × 0.03 mm, focal length shortens to 40 mm, and maximum speed leaps to 20,000 mm/min. The result: engraved jewellery, personalised watches, branded metal key fobs, stainless steel cutlery — from a machine that weighs 2.4 kg.
The image below shows the LR4-1A module inside the R1 enclosure, running a batch of butterfly motifs on metal discs — a high-throughput demonstration of what 1064 nm IR does to bare aluminium and stainless steel with no pre-treatment.
From Personalised Gifts to Small Business Inventory
The showcase below illustrates the commercial range the R1 covers: wedding cake servers with engraved names and dates, personalised leather bracelets, laser-marked keychains, compass faces, watch backs, and phone case art. The IR module handles every metallic surface shown without marking spray. A single R1 with both modules covers the product catalogue of a typical small personalisation business.
Class 1 Laser Safety: Fully Enclosed, Multi-Layer Protection
Class 1 is the safest laser classification — it means the enclosure contains all hazardous radiation under normal operating conditions. The R1 achieves this with five independent safety layers, not just an enclosure lid. The annotated diagram below identifies each mechanism on the machine body.
The full safety feature set:
- Auto-stop on cover open — laser cuts immediately when the lid lifts
- Tilt detection auto-stop — accelerometer halts the beam if the machine tips
- USB lock protection — prevents unauthorised job launches via USB
- Exposure duration detection — enforces maximum single-session burn limits
- Watchdog circuit — independent hardware watchdog monitors system state continuously
- Safe viewing cover — amber polycarbonate panel blocks harmful wavelengths during operation
2.4 kg, Backpack-Ready: True Portable Engraving
The R1 folds to 272 × 250 × 140 mm and weighs 2.4 kg. That footprint fits in a standard laptop bag compartment. The image below shows the machine in use at an outdoor table — the kind of scenario that makes the R1 viable for market stalls, pop-up personalisation services, and off-site engraving commissions.
Designed for Families and First-Timers
Class 1 safety and the companion mobile app make the R1 genuinely suitable for household use. Children can draw directly in the app and submit designs without touching the machine. The image below shows a family session: child sketches on a tablet, parents monitor, R1 executes.
Complete Mobile App: Design, Personalise, Engrave
The dedicated Ortur companion app covers the full workflow from idea to finished piece without requiring any desktop software. The image below shows the R1 paired with a smartphone running the app — the machine is connected, a design library is visible, and the user is one tap from starting a job.
Key app capabilities:
- Design library with ready-to-use templates for gifts and custom orders
- Built-in editor: add text, draw shapes, adjust layout — no PC software needed
- Quick custom text engraving: 19+ fonts, multi-language input
- Snap & Engrave: take a photo, upload with one tap, convert to engravable vector
- Online / offline dual mode — transfer files or control remotely
- Multi-language UI: English, Chinese, French, German
Eco-Certified Construction
The R1's chassis is manufactured from 92% recycled aluminium and carries CE, RoHS, and EPEAT Silver certifications. Standby power draw is 0.1 W — lower than most phone chargers. Available in misty blue-orange or white finish; the three-colour status indicator communicates operating state at a glance.
Technical Specifications of the Ortur R1 5W + IR
Machine Dimensions & Weight
| Machine Size — Folded | 272 × 250 × 140 mm |
|---|---|
| Machine Size — Unfolded | 272 × 250 × 218 mm |
| Net Weight | 2.4 kg |
| Gross Weight | 3.5 kg |
| Packaging Size | 328 × 302 × 201 mm |
The annotated dimension diagram below shows folded and unfolded profiles together with the footprint top view — useful for workspace planning and transport bag selection.
5 W Blue-Light Laser Module (LU3-5B)
| Product Name | 5W LU3-5B Laser Module |
|---|---|
| Laser Power | 5 W |
| Laser Wavelength | 450 ± 20 nm |
| Spot Size | 0.025 × 0.11 mm |
| Focal Length | 60 mm |
| Maximum Speed | 5,000 mm/min |
| Output Voltage | 24 V / 2 A |
| Laser Head Lifespan | >10,000 hours |
| Maximum Working Area | X 100 mm × Y 100 mm |
| Engravable Materials | MDF, Plywood, Pine, Paulownia, Paperboard, Paper, Kraft Paper, Leather, Acrylic, Cobblestone, Ceramics, Coated Metal, Plated Metal, Stainless Steel, Glass, Knit, Cotton, ABS Plastics, Bamboo, Silica Gel, Rubber, Ceramic Tile |
| Cuttable Materials | Paper, MDF, Plywood, Pine, Paulownia, Cardboard, Corrugated, Dark Acrylic, PVC, Knit, Cotton, ABS Plastics |
The dimension diagram below shows the LU3-5B module body: 83 mm tall with a 30 × 30 mm cross-section at the fan assembly — compact enough not to obstruct the working area.
1.3 W Infrared Laser Module (LR4-1A)
| Product Name | 1.3W LR4-1A 1064 nm Infrared Laser Module |
|---|---|
| Optical Power | 1.3 W |
| Wavelength | 1064 ± nm |
| Spot Size | 0.03 × 0.03 mm |
| Focal Length | 40 mm |
| Maximum Speed | 20,000 mm/min |
| Output Voltage | 24 V / 3 A |
| Lifespan | >10,000 hours |
| Maximum Working Area | X 100 mm × Y 80 mm |
| Engravable Materials | All Metals (Gold, Silver, Brass, Iron, Aluminium, Stainless Steel, and more), Plastic, Dark opaque acrylic |
The dimension reference below shows the LR4-1A body at 101 mm tall with a 44 × 48 mm footprint — slightly taller than the LU3-5B to accommodate the 1064 nm optical assembly.
Safety & Certifications
| Laser Safety Class | Class 1 (enclosed enclosure) |
|---|---|
| Safety Features | Watchdog, USB lock, auto shutdown, exposure duration limits, tilt detection, lid-open auto-stop |
| Certifications | CE, RoHS, EPEAT Silver |
| Recycled Aluminium Content | 92% |
| Standby Power | 0.1 W |
Connectivity & Control
| Control Interface | Mobile app (iOS / Android) + USB |
|---|---|
| App Modes | Online and offline dual mode |
| Design Fonts | 19+ fonts |
| App UI Languages | English, Chinese, French, German |
| Status Indicator | 3-colour LED |
What's in the Box
The packing list image below shows every included item. Note that the laser module supplied depends on the variant ordered (LU3-5B for the 5 W blue-light version, LR4-1A for the IR version). This listing covers the 5 W + IR combo bundle.
- Ortur R1 laser engraving machine ×1
- LU3-5B 5 W blue-light laser module ×1
- LR4-1A 1.3 W IR 1064 nm laser module ×1
- 24 V / 2 A power adapter (LU3-5B) ×1
- 24 V / 3 A power adapter (LR4-1A) ×1
- Hand screw ×1 (per module)
- Focus plate ×1 (per module)
- Triangular blade ×2
- USB data cable ×1
- USB key ×1
- Card reader ×1
- Test acrylic sheet ×1
- Test wood chips ×4
- Test aluminium sheet ×1
- Brush ×1
- Wrench ×1
What is the working area of the Ortur R1?
The Ortur R1 has a maximum engraving area of 100 × 100 mm with the 5 W LU3-5B laser module and 100 × 80 mm with the 1.3 W LR4-1A IR laser module.
Which laser module should I choose — 1.3 W IR (1064 nm) or 5 W blue-light?
The choice depends on the material. The 5 W LU3-5B module is optimised for non-metal materials including wood, leather, acrylic, MDF, fabric, and most plastics. The 1.3 W LR4-1A IR module at 1064 nm is designed for direct engraving on bare metals — gold, silver, brass, iron, aluminium, and stainless steel — without marking spray.
Can the R1's laser modules be used on other Ortur machines?
The LR4-1A infrared module used in the R1 is the same as in the Ortur R2, so these two are interchangeable. However, the 5 W LU3-5B module is exclusive to the R1 and cannot be adapted to other Ortur laser engravers.
Is the Ortur R1 safe for home and family use?
Yes. The R1 carries Class 1 laser certification, which is the safest classification — the enclosure contains all laser radiation during normal operation. Additional protections include tilt detection auto-stop, lid-open auto-stop, USB lock, exposure duration limiting, and a watchdog circuit. CE, RoHS, and EPEAT Silver certifications further confirm its compliance with European safety and environmental standards.
Are there any Ortur accessories compatible with the R1?
Currently, no Ortur accessories are listed as compatible with the R1.
Why Choose EXPERT3D?
EXPERT3D has specialised in advanced laser technology and 3D equipment since 2012 — more than a decade of hands-on experience selecting, deploying, and supporting professional and prosumer tools for creators, artisans, and small businesses across Spain and Europe. We provide pre-sales technical consultation on module selection and material compatibility, delivery coordination throughout the EU, and post-sale support backed by direct manufacturer contacts. The Ortur R1 is a compact but technically layered system: our team can help you identify the right configuration, optimise parameters for your specific materials, and get you engraving on the first session. Contact us to discuss availability and current pricing.
