Filament Bambu Lab PETG Basic 1 kg Gray
- Stock: In Stock
- Product code: 920372000002705113
- Weight Brutto: 1.30kg
- SKU: G00-D00-1.75-1000-SPL
26€
Ex Tax: 21€
Bambu Lab PETG Basic 1 kg Gray is a filament for printing brackets and wall hooks. The updated formula matches PLA Basic for strength while retaining the toughness needed to absorb impacts. Lower sensitivity to moisture reduces stringing on the surface. The filament works with all Bambu printers.
Key features and benefits
- Filament diameter: 1.75 ± 0.03 mm — A tight diameter tolerance ensures even feeding in the extruder.
- Tensile strength (X-Y): 51 ± 1 MPa — Holders, hooks and clips perform under load when its direction coincides with the print plane.
- Nozzle temperature: 230 - 260 °C — The range covers nozzles from 0.2 to 0.8 mm, so the settings can be chosen for the specific part.
- Drying before printing: 65 °C, 8 h — A dried spool reduces stringing on the surface; the same settings apply to AMS 2 Pro and AMS HT.
- Resistance to outdoor conditions: the material resists water, UV and temperature changes, so garden signs and bathroom accessories keep their shape.
- UL GREENGUARD certification (UL 2904): particle and VOC emissions are lower than levels in an average kitchen, living room or office, so printing indoors does not degrade the air.
- RFID tag on the spool: the print parameters are stored in the RFID tag and read via Bambu Lab AMS, so the material profile does not need to be entered manually.
- Palette of 13 colours: one range covers home décor and outdoor gear, so different items can be printed with a single material.
Applications
The updated formula of Bambu Lab PETG Basic 1 kg Gray matches PLA Basic for strength while retaining the toughness needed to absorb impacts.
The material is resistant to water, UV and temperature, so it is suitable for printing outdoors and in damp rooms.
The PETG Basic range comes in 13 colours: from home décor to outdoor gear.
Lower sensitivity to moisture reduces stringing compared with standard PETG. Drying before printing is still recommended.
The UL GREENGUARD (UL 2904) certification confirms low emissions when printing indoors.
- Household holders and brackets: the impact strength of 34.2 ± 4.1 kJ/m² in the X-Y plane withstands knocks. Along the Z axis it is 10.5 ± 1.8 kJ/m². Therefore, orient the part so that the load runs along the layers.
- Garden signs and bathroom accessories: resistance to water, UV and temperature is confirmed in the material description; water absorption at saturation is 0.45 % (25 °C, 55 % RH).
- Printing in living spaces: particle and VOC emissions under the UL GREENGUARD (UL 2904) certification are lower than levels in an average kitchen, living room or office. The material is odourless.
- Décor and outdoor gear: 13 colours make it possible to print home décor and outdoor accessories with a single material.
Compatibility and accessories
The print parameters are stored in the spool's RFID tag and read via Bambu Lab AMS. The Bambu Lab PETG Basic 1 kg Gray filament is compatible with all Bambu 3D printers.
- AMS systems: AMS, AMS 2 PRO, AMS HT, AMS Lite.
- Nozzles: 0.2, 0.4, 0.6, 0.8 mm.
- Build plates: Cool Plate Supertack, Textured PEI Plate, Smooth PEI Plate.
- Supports: made of PLA or PETG.
Technical specifications
| Parameter | Value |
| Diameter | 1.75 mm |
| Net filament weight | 1 kg |
| Spool material | ABS |
| Spool heat resistance | 70 °C |
| Spool diameter | 200 mm |
| Spool height | 67 mm |
| Drying settings before printing: forced-air drying oven | 65 °C, 8 h |
| Drying settings before printing: heated bed of X1, P and H2 series printers | 80 °C, 12 h |
| Drying settings before printing: AMS 2 Pro and AMS HT | 65 °C, 8 h |
| Printer compatibility | All Bambu 3D printers |
| AMS compatibility | AMS, AMS 2 PRO, AMS HT, AMS Lite |
| Humidity during printing and storage | < 20 % RH (sealed, with desiccant) |
| Nozzle size | 0.2, 0.4, 0.6, 0.8 mm |
| Nozzle temperature | 230 - 260 °C |
| Build plate type | Cool Plate Supertack, Textured PEI Plate, Smooth PEI Plate |
| Bed temperature | 65 - 75 °C |
| Cooling fan | 0 - 60 % |
| Print speed | < 200 mm/s |
| Retraction length | 0.4 – 0.8 mm |
| Retraction speed | 30 - 60 mm/s |
| Chamber temperature | 35 – 50 °C |
| Max. overhang angle | ~70° |
| Max. bridge length | ~30 mm |
| Support material | PLA/PETG supports |
| Adhesive | Recommended (glue stick/liquid glue) |
| Density | 1.25 g/cm³ (ISO 1183) |
| Melt flow rate | 22.9 ± 2.4 g/10 min (245 °C, 2.16 kg) |
| Glass transition temperature | 69 °C (DSC, 10 °C/min) |
| Vicat softening temperature | 69 °C (ISO 306, GB/T 1633) |
| Heat deflection temperature (ISO 75, 1.8 MPa) | 68 °C |
| Heat deflection temperature (ISO 75, 0.45 MPa) | 71 °C |
| Water absorption at saturation | 0.45 % (25 °C, 55 % RH) |
| Young's modulus (X-Y) | 2780 ± 65 MPa (ISO 527, GB/T 1040) |
| Young's modulus (Z) | 2550 ± 100 MPa (ISO 527, GB/T 1040) |
| Tensile strength (X-Y) | 51 ± 1 MPa (ISO 527, GB/T 1040) |
| Tensile strength (Z) | 35 ± 6 MPa (ISO 527, GB/T 1040) |
| Elongation at break (X-Y) | 9.5 ± 0.7 % (ISO 527, GB/T 1040) |
| Elongation at break (Z) | 5.2 ± 1.4 % (ISO 527, GB/T 1040) |
| Flexural modulus (X-Y) | 1950 ± 50 MPa (ISO 178, GB/T 9341) |
| Flexural modulus (Z) | 1740 ± 40 MPa (ISO 178, GB/T 9341) |
| Flexural strength (X-Y) | 75 ± 3 MPa (ISO 178, GB/T 9341) |
| Flexural strength (Z) | 56 ± 4 MPa (ISO 178, GB/T 9341) |
| Impact strength (X-Y) | 34.2 ± 4.1 kJ/m² (ISO 179, GB/T 1043) |
| Impact strength (Z) | 10.5 ± 1.8 kJ/m² (ISO 179, GB/T 1043) |
| Odour | Odourless |
| Composition | PETG |
| Skin hazard | Not hazardous |
| Chemical stability | Stable under normal storage and use conditions |
| Solubility | Insoluble in water |
| Acid resistance | Not resistant |
| Alkali resistance | Not resistant |
| Resistance to organic solvents | Not resistant to some organic solvents |
| Resistance to oils and greases | Resistant to most oils and greases |
| Flammability | Flammable |
| Combustion products | Water, carbon oxides |
| Odour of combustion products | Odourless |
| Printer used for printing samples | X1-Carbon |
| Nozzle temperature when printing samples | 255 °C |
| Bed temperature when printing samples | 70 °C |
| Print speed for samples | 150 mm/s |
| Infill density when printing samples | 100 % |
| Annealing of printed parts | Not recommended, as only a very limited improvement in properties can be achieved, and parts with a complex shape and structure may deform noticeably |
| Recommended annealing temperature | 60–70 °C |
| Recommended annealing time | 6–12 hours |
| Oven requirements for drying filament and annealing parts | An oven with sufficient internal volume and uniform temperature distribution, for example a forced-air drying oven; the filament and parts should be placed away from the heater |
| Microwave or kitchen oven | Not suitable; the filament and parts may be damaged |
| Tensile test specimen | Dog-bone-shaped specimen, overall length 150 mm, gauge section dimensions 114 mm and 80 mm, end width 20 mm, narrow section width 10 mm, thickness 4 mm (Z axis indicated) |
| Bending test specimen | Rectangular bar, 80 mm × 10 mm × 4 mm (Z axis indicated) |
| Impact test specimen | Rectangular bar, width 10 mm, thickness 4 mm, with a 45° V-shaped notch in the centre (Z axis indicated) |
Why buy Bambu Lab PETG Basic 1 kg Gray from EXPERT3D?
EXPERT3D has been supplying professional 3D equipment since 2012. Our specialists provide advice before purchase and help you choose a filament for your printer. The consultation covers compatibility with AMS, nozzles and build plates. We deliver across Spain and the EU countries. Order Bambu Lab PETG Basic 1 kg Gray and other consumables on the website. After purchase, customers are supported by our service team.
