Filament Bambu Lab PLA Matte 1.75 mm 1 kg Refill Ash Gray

Bambu Lab PLA Matte Spool free 1.75 mm 1 kg Ash Gray is a matte PLA filament for high-speed printing. The matte surface reduces visible layer lines and gives a non-glossy look. All print parameters are stored in an RFID tag read by the AMS. The UL GREENGUARD certificate confirms low emissions when printing indoors.

Key features and benefits

• Print speed: up to 300 mm/s — Models print without manually tuning settings, using a 0.4 mm nozzle, 0.4 mm line width and 0.2 mm layer height.
• Diameter: 1.75 mm ± 0.03 mm — The diameter tolerance determines how evenly the filament feeds into the extruder.
• Certification: UL GREENGUARD (UL 2904) — Particles and VOCs (volatile organic compounds) during printing are lower than levels in an average kitchen, living room or office.
• Nozzle temperature: 190 - 230 °C — The datasheet samples were printed at 220 °C, giving a ready starting point for a profile.
• Matte texture: reduces visible layer lines, so the surface looks smooth and non-glossy.
• RFID tag with parameters: the AMS reads the stored print settings, so manual profile selection is not needed.
• Biodegradability: the material can biodegrade under some industrial composting conditions.

Applications

PLA Matte is suited to parts where appearance matters. Pink, brown and green spools lie stacked on a wooden table next to books.

A city skyline of matte blue, purple and white skyscrapers shows the fine detail of the print.

Matte toy cars in different colours, including green, demonstrate the filament's palette and print surface.

Three printed desk clocks with matte parts have ribbed arched dials and contrasting hands.

The picture shows a family with a dog next to a 3D printer running indoors. The UL GREENGUARD badge indicates low chemical emissions.

• Architectural models and display samples: the matte surface reduces visible layer lines and gives the non-glossy look needed for presentation models.
• Art and decorative projects: the muted palette matches the matte finish, and the Apple Green shade adds a green tone to the parts.
• Serial desktop products: for example, clocks: the material does not require lengthy setup, so a batch can be started without separate parameter tuning.
• Printing with the AMS: the RFID tag contains print parameters read by the AMS, so the material profile is loaded automatically.
• Indoor printing: UL GREENGUARD certification confirms that particles and VOCs are lower than levels in an average kitchen, living room or office; ventilation is required.

Hardware compatibility

The filament is compatible with all printers, build plates and nozzles. Recommended plates: Cool Plate, High Temperature Plate or Textured PEI Plate. Recommended nozzle size: 0.2, 0.4, 0.6 or 0.8 mm. Support material: Support for PLA. Refill filament must be used with a spool.

The filament is compatible with all AMS series. The multi-spool feeder above the printer's touchscreen shows an “Auto Detection” callout for the loaded filament types.

Why buy Bambu Lab PLA Matte Spool free 1.75 mm 1 kg Ash Gray filament from EXPERT3D?

EXPERT3D has supplied professional 3D equipment since 2012. Bambu Lab PLA Matte Spool free 1.75 mm 1 kg Ash Gray filament is available to order. We deliver across Spain and EU countries. We advise before purchase and help with print settings. After purchase, we provide service support. For technical questions about printing, contact our specialists. Order consumables on the website so your equipment never sits idle.