3D Printer Elegoo OrangeStorm Giga

Industrial Power: Discover the Elegoo OrangeStorm Giga 3D Printer

Looking to manufacture full-scale components without the complications of assembly or post-processing cuts? The Elegoo OrangeStorm Giga redefines the standards of Fused Deposition Modeling (FDM) technology with a colossal build volume. Designed specifically for engineers, industrial designers, and creators who demand large-scale results, this machine eliminates any size limitation — enabling the production of single-piece functional prototypes, full-body cosplay props, and automotive components with unrivalled structural integrity.

Massive Build Volume and High-Efficiency Thermal Management

The defining advantage of the Elegoo OrangeStorm Giga lies not only in its impressive build area of 800 × 800 × 1000 mm, but in its sophisticated energy-efficiency system. Heating a surface of these dimensions is typically costly; to address this, the machine integrates four fully independent high-temperature magnetic PEI build plates.

The intelligent system detects the model's position and heats only the required zone, whilst also allowing manual control to activate all four areas and reach 100 °C across the entire surface in just 17 minutes. This ensures optimal adhesion whilst drastically reducing energy consumption.

Extreme Speed and Processing Power with Klipper

Controlling a print head across a structure of these dimensions demands exceptional processing power. Equipped with a 64-bit quad-core processor (SOC RK3328) and Klipper firmware, the OrangeStorm Giga handles data at remarkable speeds. This enables print speeds of up to 300 mm/s — six times faster than standard large-format printers. Thanks to its resonance compensation algorithms and integrated acceleration sensor, vibrations are fully mitigated, ensuring smooth layers and precise finishes even at the most demanding print rates.

Industrial Productivity: Multi-Nozzle Printing System

To maximise throughput in serial production environments, the OrangeStorm Giga offers unprecedented versatility: the ability to install up to three additional print heads on the X-axis. This enables the simultaneous printing of four identical models, quadrupling your productive capacity within the same operating time. It is also possible to use different filament colours in each nozzle to create variations of the same design, transforming the OrangeStorm Giga into a highly efficient micro-factory. *Note: An electrical installation capable of supporting the additional load of 100 W per extra print head is required.*

High-Performance Extrusion and Robust Architecture

The precision of every layer is assured by a dual-gear direct extruder and a brass nozzle capable of operating at 300 °C. Its design includes a full titanium alloy heat break and a 60 W ceramic heater, ensuring a consistent material flow for demanding technical polymers. The mechanical robustness is equally impressive: linear rails on the X and Y axes provide superior stability, whilst caterpillar-style cable chains protect the wiring against wear and external factors, guaranteeing a long service life and operational reliability in professional environments.

Technical Specifications of the OrangeStorm Giga 3D Printer

Print Parameters

• Print Technology: Fused Deposition Modeling (FDM).
• Build Volume: 800 x 800 x 1000 mm.
• Print Surface Dimensions (PEI Area): 820 x 820 mm (comprising 4 independent PEI plates of 410 x 410 mm).
• Print Speed: 30–300 mm/s (recommended: 150 mm/s).
• Maximum Acceleration: 5,000 mm/s².
• Dimensional Accuracy: ±0.1 mm.
• Layer Height: 0.1–0.5 mm (recommended: 0.24 mm).
• Maximum Nozzle Temperature: 300 °C.
• Extrusion System: Dual-gear direct extrusion with dual-fan cooling.
• Nozzle Diameter: 0.6 mm.
• Heat Break Material: Full titanium alloy.
• Motor Drivers: Ultra-silent drivers on all axes.
• Compatible Materials: Polylactic Acid (PLA), Polyethylene Terephthalate Glycol (PETG), Thermoplastic Polyurethane (TPU).
• Filament Diameter: 1.75 mm.
• Multi-Nozzle Capability: Yes (supports up to 4 print heads).
• Automatic PID Calibration: Yes.
• Nozzle LED Lighting: Yes.
• Filament Run-Out Sensor: Yes.

Electrical and Thermal Specifications

• Operating Ambient Temperature: 5 °C – 40 °C.
• Maximum Heatbed Temperature: 100 °C.
• Print Surface: Magnetic PEI spring steel.
• Input Voltage: 100–120 VAC / 220–240 VAC, 50/60 Hz.
• Output Voltage: 24 V.
• Rated Power: 1,530 W (with one print head; +100 W per additional print head).
• Power Recovery Function: Yes.

Software and Connectivity

• Mainboard: High-speed silent Klipper 64-bit ARM board, Quad-Core processor at 1.5 GHz.
• Connection Options: USB, LAN (Ethernet), Wi-Fi.
• Supported Input Formats: STL, OBJ.
• Output Format: G-code.
• Firmware: Klipper.
• Slicer Software: Cura and other compatible slicers.
• User Interface: 10.1-inch colour capacitive touchscreen.
• Languages: Spanish, English, French, German, Russian, Italian, Japanese, Chinese.
• Automatic Levelling: Yes, high-precision 100-point system.

Dimensions and Mechanics

• Z-Axis Mechanics: Precision lead screw.
• Maximum Operating Space (including supports): 1,224 x 1,520 x 1,570 mm.
• Machine Dimensions: 1,224 x 1,164 x 1,441 mm.
• Packaging Dimensions (Base and XY Components): 1,350 x 1,215 x 420 mm.
• Packaging Dimensions (Z-Axis Components): 1,350 x 1,215 x 350 mm.
• Net Weight: 104 kg.
• Gross Weight: 145 kg.

Box Contents

• OrangeStorm Giga 3D Printer unit.
• Print head.
• Touchscreen control display.
• Levelling plates (x2).
• Support arm.
• Speaker.
• Filament break detection sensors (x2).
• Z-axis cable chains (Caterpillar tracks).
• Z-axis safety stoppers (x2).
• Filament guide assembly.
• Independent spool holder (5 kg capacity).
• Power cable.
• Precision levelling card.
• Maintenance lubricating grease.
• Test corner brackets (x8).
• Complete tool kit.
• Screws and fixings set.
• Detailed user manual.

At EXPERT3D, we have been a reference in the additive manufacturing industry since 2012, offering the latest generation of equipment. When you purchase your Elegoo OrangeStorm Giga with us, you benefit from the backing of a specialist technical service and premium after-sales support, designed to ensure the success of your most ambitious industrial projects. Maximise your investment with expert guidance and tailored solutions.