Menu

Unitree Go2 Standard battery

Unitree Go2 Standard battery
Unitree Go2 Standard battery
Unitree Go2 Standard battery
Unitree Go2 Standard battery
New

Unitree Go2 Battery BT2-05 — standard battery for powering quadruped robots, featuring BMS control. A DC 28.8 V nominal voltage delivers steady power to the moving platform. Support for accelerated charging shortens forced pauses between operational runs. Eight-level electronic protection monitors cell condition during operation and extended standby.

Key specifications and benefits

  • Nominal capacity: 8000 mAh, 236.8 Wh — Provides the energy reserve required for routine missions and extended standby duty.
  • Charging current: 3.5 A – 9 A — Restores battery charge rapidly between deployments and reduces forced equipment downtime.
  • Compliance standard: IEC 62133-2 — Confirms adherence to international electrical safety regulations for operation in mobile robotics.
  • Housing dimensions: 120 mm × 80 mm × 182 mm — Ensures precise seating and quick locking in the robot bay without adaptors.
  • Proprietary BMS management: Inside the Unitree Go2 Battery BT2-05, onboard electronics coordinate cell operation and stabilise power delivery.
  • Eight-level safety circuit: Protects the battery against overcharging and deep discharge. It also prevents short circuits and overcurrent faults.
  • Service life preservation when idle: Automatic self-discharge control and cell balancing maintain working readiness during long-term storage.
  • Mechanical connector protection: Separate keyed charging and discharge ports prevent accidental misconnection of power lines.

Power management in Unitree Go2 Battery BT2-05

Mobile robots operate under fluctuating loads. High-performance battery cells paired with Unitree's proprietary BMS stabilise current delivery. The Unitree Go2 Battery BT2-05 module supports charging currents ranging from 3.5 A to 9 A. The charging voltage limit is DC 33.6 V, so the charger must match this threshold.

  • Charging mode control: The controller tracks charging current and voltage alongside temperature, cutting input power on time.
  • Battery pack balancing: The system equalises voltage across cells during charging to preserve usable pack capacity.
  • Power circuit protection under load: Onboard electronics detect connected loads and interrupt current upon a short circuit. They also prevent deep discharge.
  • Storage mode protection: The BMS limits self-discharge currents in standby and keeps the battery ready between field deployments.

Housing design, status indication and power interfaces

Field battery swaps demand speed. A mechanical latch and tab secure the 120 × 80 × 182 mm housing inside the robot bay. A panel-mounted power switch and LED indicator provide direct power control and status monitoring. Dedicated discharge and charging ports feature keying guides that prevent incorrect connector orientation.

Unitree Go2 battery housing with latch, locking tab, LED, power switch, keying slots and separate power and charging sockets
Controls and connectors: Push latch, lock tongue, LED indicator, power button, port keying guides, power discharge and charging interfaces.

Equipment compatibility

This model is designed for the Go2 platform. The Unitree Go2 Battery BT2-05 is the standard factory power pack for the Unitree Go2 quadruped robot. Its latch layout and keyed port geometry match the battery compartment and charging circuit of this series. For longer autonomous missions, the manufacturer's range includes the alternative high-endurance BT2-06 version.

Technical specifications

ParameterValue
Nominal voltageDC 28.8 V
Charging voltage limitDC 33.6 V
Charging current3.5 A – 9 A
Nominal capacity8000 mAh, 236.8 Wh
Compliance standardIEC 62133-2
Dimensions120 mm × 80 mm × 182 mm

Why buy the Unitree Go2 Battery BT2-05 from EXPERT3D?

EXPERT3D has supplied professional 3D equipment since 2012. Our engineers help select the Unitree Go2 Battery BT2-05 for your platform's operational tasks. Every order includes warranty coverage and dedicated after-sales service support from our technical team. We provide equipment delivery across Spain and the EU. Order compatible spare parts and consumables on our website to maintain consistent equipment operation. Contact our team for a pre-purchase consultation.

Write a comment