Menu

Unitree Go2 Long-Endurace battery

Unitree Go2 Long-Endurace battery
Unitree Go2 Long-Endurace battery
Unitree Go2 Long-Endurace battery
Unitree Go2 Long-Endurace battery
New

Unitree Go2 Battery BT2-06 — a battery for the Go2 robot that extends running time between charges. A flat battery stops the quadruped robot mid-task, and the work has to be interrupted. Unitree's high-performance cells and proprietary battery management system (BMS) deliver strong power. Multi-level protection monitors both charging and discharging.

Key specifications and benefits

  • Rated capacity: 15,000 mAh, 432 Wh — This energy reserve determines how long the Go2 runs before the next charge.
  • Rated voltage: DC 28.8 V — Check this voltage rating against the robot's specification before ordering.
  • Charging current: 3.5–9 A — Charging takes place within this range, and current protection monitors compliance.
  • Maximum charging voltage: DC 33.6 V — This is the upper charging-voltage limit, which overcharge protection monitors.
  • Proprietary BMS: Unitree's battery management system works with the high-performance cells and delivers strong power to the Go2.
  • Eight types of protection: They cover the energy path from storage to discharge. Short-circuit protection works separately.
  • IEC 62133-2 standard: It is listed as the applicable standard in the technical specifications, so compliance can be checked before ordering.

Power for the Go2: the long-endurance version

The Go2 quadruped robot is limited by its battery's energy reserve. The BT2-06 version is designed for long endurance, while the standard version is designated BT2-05. Check the designation when ordering.

Cells and BMS

Unitree Go2 Battery BT2-06 combines high-performance cells with a proprietary battery management system (BMS). The BMS is an electronic system that monitors the condition of the cells and the charging and discharging processes. Together they deliver strong power to the Go2.

Rated capacity is 15,000 mAh, or 432 Wh, at a rated voltage of DC 28.8 V. A watt-hour accounts for both capacity and voltage, so it is the convenient figure for comparing batteries. The technical specifications give no runtime in hours. Use 432 Wh as the guide.

Housing and controls

The housing measures 120 × 80 × 182 mm. It carries a power switch and green LED indicators. The design also includes side latches and ports.

Labelled overview of the battery components: power switch, green LED indicators, side latches and ports
Housing layout: position of the controls and connections

Eight types of fault protection

Each mode has its own risks. Unitree Go2 Battery BT2-06 has eight types of protection. They act along the whole energy path: from storage to discharge.

  • Storage and self-discharge: Protection is active during storage and controls the battery's self-discharge.
  • Charge balancing: Monitors balanced charging of the cells.
  • Overcharge: Protects the battery from charging beyond the permitted level; the maximum charging voltage is DC 33.6 V.
  • Charging temperature: Monitors temperature conditions during charging.
  • Charging current: Monitors the current, which the specification gives as 3.5–9 A.
  • Short circuit: Protects the battery from a short circuit in the circuit.
  • Over-discharge: Protects the cells from discharging below the permitted level.
  • Load detection: Monitors the load connected to the battery.

Charging parameters and standard

Charging needs to match the battery's parameters. The maximum charging voltage of the Unitree Go2 Battery BT2-06 is DC 33.6 V, and the charging current is 3.5–9 A. Separate protections monitor charging temperature and current. The applicable standard is IEC 62133-2.

Technical specifications

ParameterValue
Rated voltageDC 28.8 V
Maximum charging voltageDC 33.6 V
Charging current3.5–9 A
Rated capacity15,000 mAh, 432 Wh
Applicable standardIEC 62133-2
Size120 × 80 × 182 mm

Why buy the Unitree Go2 Battery BT2-06 from EXPERT3D?

EXPERT3D has supplied professional 3D equipment since 2012. Our specialists provide pre-purchase consultation and help choose the configuration. A specialist will also explain how the BT2-05 and BT2-06 versions differ. We deliver across Spain and the EU. After purchase, we provide service support. Spare parts and consumables can be ordered on the website. To order the Unitree Go2 Battery BT2-06 or check compatibility with your robot, contact a manager.

Write a comment