3D Printer Bambu Lab P1S Combo

Bambu Lab P1S Combo 3D Printer with AMS System

The high-performance Bambu Lab P1S Combo 3D printer with Automatic Material System (AMS) allows you to print with up to 16 filament colours simultaneously.

Built on the foundations of the P1P additive system, the P1S Combo 3D printer features a 256×256×256 mm build volume and a fully enclosed print chamber. It also includes a built-in activated carbon air filter and an improved cooling system. The controlled air quality inside the print chamber enables reliable printing of materials prone to high thermal shrinkage. It also allows harmful substances released during printing — such as those from ABS — to be filtered out. The printer is equipped with a more powerful cooling system for printed models, a forced-air circulation fan inside the chamber, and an additional fan on the control panel to cool the control board.

The P1S Combo 3D printer inherits engineering solutions from the P1P and P1S, which were themselves developed on the basis of the flagship Bambu Lab X1. As a result, it delivers accelerations of up to 20 m/s² and print speeds of up to 500 mm/s, using vibration damping algorithms and dynamic flow rate adjustment. The dual-gear direct-drive extruder provides precise filament control, while the all-metal hotend heats up to 300 °C and supports composite materials such as carbon- and glass-fibre reinforced polymers.

Automatic Material System (AMS)

Each module accepts up to four spools, and up to four modules can be connected to the printer, bringing the total filament selection to sixteen.

Bambu Lab P1S Combo — Key Features

• Ready to print straight out of the box: set up in 15 minutes.
• Print up to 16 colours with AMS. Includes an Automatic Material System that enables printing with up to 16 filament colours at once.
• Automatic build plate levelling and vibration compensation during printing.
• Perfect first layer.
• The automatic bed levelling (ABL) sensor calibrates and aligns the build plate correctly, ensuring a perfect first layer for every print job.
• Finely tuned hardware and software.
• Direct-drive extruder. Better control over extrusion and retraction of flexible filaments. Precise, consistent extrusion for smooth, sharp prints.
• Enclosed chamber for printing with high-temperature materials.
• Built-in filter: a solution for printing filaments that emit harmful gases, such as ABS.
• Print speeds of up to 500 mm/s. The advanced control algorithm with vibration compensation and pressure advance ensures fast print speeds without compromising quality.
• Acceleration of up to 20,000 mm/s². Acceleration from zero to 500 mm/s takes just 0.025 seconds.
• Built-in camera for remote monitoring and time-lapse recording.
• Remote monitoring and control via Bambu Studio and Bambu Handy.

Bambu Lab P1S Combo — Advanced Capabilities

• All-metal hotend. A durable design built to handle high-temperature 3D printing filaments, including ABS and carbon fibre. Delivers precise, smooth extrusion for high-quality prints.
• Power loss recovery. No need to worry about power cuts — the printer resumes from exactly where it left off.
• Speed-feedback fans. The speed-feedback sensor monitors fan speed, ensuring it always operates at the optimal rate.
• Filament run-out sensor. Eliminates the problem of empty spools mid-print. Swap the filament when it runs out and resume seamlessly.
• Semi-automatic belt tensioning. Belt tension is critical for dimensional accuracy. Resonance frequency identification is performed each time to maintain the correct tension.
• Live view and time-lapse recording. The built-in camera makes it easy to monitor prints in Bambu Studio and Handy, as well as create video recordings of the printing process.

Bambu Lab P1S Combo — Technical Specifications

Bambu Lab P1S Combo 3D Printer — Best Price