- Stock: In Stock
- Product code: F2 Ultra UV Deluxe Bundle
- Weight Brutto: 32.00kg
- SKU: P0101000396-P3010010-P5010454-P5010391
The xTool F2 Ultra UV 5 W Laser Engraver Deluxe Bundle combines a 355 nm cold-process galvanometer laser with four precision accessories — the Auto Streamline™ Conveyor, RA3 Rotary Attachment, and SafetyPro™ AP2 air purifier — into a single production-ready system. Batch engrave on flat stock up to 200 mm × 500 mm, process cylinders from 3 mm to 198 mm diameter, and filter 99.97% of particulates, all from a compact desktop footprint.
| Laser Type | 5 W 355 nm UV Laser |
|---|---|
| Max. Working Speed | 15.000 mm/s |
| Working Area with Conveyor | 200 mm × 500 mm |
| Rotary Diameter Range (Roller) | 3 – 198 mm |
Why UV at 355 nm Changes Everything
Most desktop lasers operate thermally — they burn. The 355 nm UV laser works through photochemical bond-breaking: high-energy photons disrupt molecular structures with virtually no thermal transfer to the surrounding material. This cold processing is why the F2 Ultra UV produces burn-free edges, requires no pre-coating or post-polishing, and handles heat-sensitive substrates that would be destroyed by CO₂ or fiber alternatives.
The UV spot size is 0,02 × 0,02 mm — over 100× smaller than a CO₂ spot. Combined with 0,001 mm vector resolution, this physical advantage makes it possible to engrave text as small as 0,3 mm, mark watch movements and chips with 0,2 mm positional accuracy, and create 3D subsurface sculptures inside glass with museum-grade sharpness.
Cold Processing: No Burns, No Cleanup, One Step
The difference between thermal and cold laser processing is visible immediately on wood. A conventional laser leaves dark, scorched edges. The F2 Ultra UV produces clean relief texture with zero charring — no masking tape, no chemical treatment, no sanding. This clean-process behaviour extends to soap, chocolate, silicone, and ceramics — all materials that warp or discolour under heat.
Auto Streamline™ Conveyor: Factory Productivity, Desktop Footprint
The Auto Streamline™ Conveyor closes the gap between a single-piece precision engraver and a production system. It comes pre-assembled — one cable connects it to the F2 Ultra UV, and the machine's smart camera takes over from there. Load materials onto the belt, confirm the layout in xTool Studio, and collect finished pieces. No manual repositioning between items.
The conveyor extends the standard 200 × 200 mm surface working area to 200 mm × 500 mm — a 2.5× increase in engraving length — while supporting material loads up to 10 kg and items up to 81,5 mm thick. The PU belt, certified to California Proposition 65 standards, is a healthier alternative to common PVC belts and travels the full 500 mm length without slippage.
The smart camera inside the F2 Ultra UV does more than preview — it identifies each object's contour on the conveyor and automatically maps the design to it. The following image shows xTool Studio detecting circular coaster shapes on the belt and aligning the design to each one, while the operator monitors from a laptop.
Batch Production: Eight Flasks in a Single Run
Place identical materials on the belt and the camera takes care of the rest. The image below shows eight personalised steel groomsman flasks engraved sequentially in a single automated run — no operator intervention required between pieces.
Two distinct production modes cover every scenario. For large formats, the conveyor moves a single oversized piece under the stationary laser head — a family photo across 220 × 500 mm becomes one uninterrupted job. For small-item batches, multiple objects are placed side by side: jewellery pendants, wood spoons, business card blanks, or branded tokens — all engraved in a single pass.
RA3 Rotary Attachment: Every Round Surface Is Now a Canvas
The xTool RA3 is a 4-in-1 rotary attachment that expands engraving capability to cylinders, spheres, rings, and irregular shapes. Chuck mode handles diameters from 0 to 130 mm; roller mode covers 3 to 198 mm. Inner rings are processed at a fixed 26° angle — set in one step, no iterative tuning.
The MagSwap™ design makes switching between chuck and roller modes entirely tool-free. Magnetic pin-alignment locks each module into position in seconds. The image below shows the jaw exchange mechanism: from parts to a configured chuck with no screws, no loose hardware.
The new T-type jaw design, with additional contact points and an expanded grip range, secures rims up to 130 mm in diameter without slipping — a direct upgrade from the 100 mm limit on the previous RA2 Pro. High-value items stay firmly positioned throughout the engraving cycle.
The RA3 supports all rotary mode types available on the F2 Ultra UV: chuck, roller, sphere, ring, and inner ring. Full-wrap engraving on revolving vases — previously impractical due to continuously varying radius — is now achievable. Batch production is supported via the optional Chuck Kit and Roller Extension Kit, allowing multiple items to process in a single, efficient run at speeds up to 1200 mm/s.
For custom order production, the RA3 roller batch mode allows up to 3 sets of rollers to run simultaneously, maximising throughput on cylindrical items. Chuck batch mode keeps the next item loaded and ready while the current one engraves.
Full-wrap engraving on a revolving vase is one of the most technically demanding rotary operations. The image below shows a completed full-wrap design on a glass vase — seamless from any viewing angle.
SafetyPro™ AP2: 7-Layer Filtration for Clean Air
The SafetyPro™ AP2 air purifier provides up to 7 stages of filtration engineered for continuous laser processing environments. SGS-certified results: 99.99% PM2.5 removal, 99.97% 0.3 µm dust filtration, and 99.99% TVOC removal. Acrylic cutting — one of the harshest odour-generating operations — produces 0.0 ppm VOC readings at the purifier outlet.
The 7-layer filtration stack works from coarse to fine. A SuperCyclone pre-filter (36 cyclones) removes particles over 5 µm aerodynamically — no contact, no clogging — and extends downstream filter life by up to 10×. The Ultra-Dense Carbon Mesh layer uses carbon particles 400× smaller than standard activated carbon, achieving superior VOC adsorption capacity with the same physical footprint.
The image below shows a direct VOC comparison during acrylic cutting: 3.3 ppm without the purifier versus 0.0 ppm with the AP2 active, demonstrating the practical elimination of cutting odour in enclosed workspaces.
Ultra-dense carbon mesh is the primary odour absorption stage. Carbon particles sized at 0.36 mm³ — versus the 157.9 mm³ of standard carbon — pack far more surface area into the same volume, delivering sustained adsorption performance over a longer service interval.
The SuperCyclone technology uses multi-cyclone arrays to separate particles by centrifugal force before they reach the filter cartridges, preventing premature clogging even during heavy-duty basswood and acrylic processing.
The comparison below illustrates the lifespan benefit: with the cyclone pre-filter in place, downstream filter cartridges last up to 10× longer under identical processing conditions.
At 150 m³/h airflow and 220 W power draw, the AP2 is sized for desktop laser workloads. The 55 dB operating noise level is low enough for shared studio or office environments. Purified exhaust air can be discharged directly into the room — no external ducting required — as it meets indoor air quality standards.
Intelligent Control: Sync, Monitor, Automate
The AP2 connects wirelessly to the F2 Ultra UV via a Bluetooth Dongle. In AUTO mode, the purifier starts and stops with the laser, adjusts airflow based on the selected material, and monitors filter life in real time through xTool Studio. The pull-out magnetic door design makes filter cartridge replacement a tool-free, one-minute operation.
The high-torque centrifugal motor and modular filter stack are accessible from the front panel — no disassembly of the machine required. The image below shows the motor assembly alongside the multi-layer cartridge array for low-noise, localised fume extraction.
Glass Mastery: 3D Inner Engraving and Surface Work
No other desktop laser handles glass like a UV source. The F2 Ultra UV focuses the beam beneath the surface of glass blocks, crystal balls, and transparent acrylic to create permanent 3D subsurface engravings — the outer surface remains entirely untouched. Processing speed is up to 180% faster than traditional UV machines. Surface operations include flat engraving, embossing, cutting, and rotary engraving up to 150 mm diameter.
Two switchable field lenses — one optimised for inner engraving (70 × 70 mm), one for surface work (200 × 200 mm) — let a single machine cover both workflows without any mechanical modification. These lenses are specific to the F2 Ultra UV and cannot be interchanged with standard F2 Ultra optics.
Dual 48 MP Cameras: 0,2 mm Positioning Accuracy
The F2 Ultra UV integrates two 48 MP cameras working in tandem for autofocus, automatic positioning, and real-time preview — achieving 0,2 mm positioning accuracy, 60% more precise than single-camera systems. LiDAR ranging adds a second verification layer for accurate focus on curved and irregular surfaces.
Micron Precision for Jewellery, Watch Parts, and Microelectronics
A 0,001 mm vector resolution and 0,00133 mm motion resolution in inner engraving mode produce detail that rivals industrial marking systems. Text micro-engraved on a diamond ring remains readable under magnification while leaving the gemstone surface entirely undamaged.
Material Versatility: What Other Lasers Cannot Reach
The 355 nm wavelength is absorbed by nearly all materials — including fully transparent acrylic, clear glass, and silicone — where CO₂ and fiber sources reflect or pass through without effect. Commercial applications include keyboard keycap legends, green acrylic business cards, metal compass medallions, denim fabric, ceramic mugs, glass spirits bottles, and silver jewellery.
The AP2 purifier is equally versatile in application scope. Beyond laser processing, it handles fumes from arc welding, electronics soldering, and mechanical woodworking — making it a practical addition to any light industrial workstation.
High-Value Output: Premium Products at Scale
UV laser output commands premium pricing because no other desktop process achieves the same combination of resolution, material range, and clean finish. With the conveyor and RA3 added to the workflow, those premium products can now be produced in volume: personalised crystal photo blocks, engraved metal rings, feather-etched champagne flutes, 3D crystal balls, and resin pendants — all at batch scale.
Safe by Design: Class 4 Laser with Full Enclosure
The F2 Ultra UV ships pre-assembled with Class 4 laser safety certification. An emergency auto-stop halts the beam immediately if the enclosure is interrupted. The conveyor is compatible with the protective enclosure — keep the enclosure no more than 5 mm above the material surface during conveyor operation. Only professionally trained personnel should operate the system with the conveyor in use, as diffused laser beams may exit the enclosure openings. Operating range: 10 °C to 30 °C; storage down to -10 °C.
The standalone F2 Ultra UV unit, shown below, weighs 22,5 kg with a machine footprint of 294 × 429 × 520 mm. The conveyor adds 1002 × 290 × 89 mm alongside it and weighs 8,545 kg.
The AP2 technical specification comparison below summarises filter tier performance against the six-layer baseline, including the cyclone pre-filtration count and primary filter service life.
Tech Tip: Never cut materials directly on the conveyor belt — the laser beam will permanently damage the PU surface. Use the conveyor exclusively for engraving operations. When switching between the inner engraving lens and the surface engraving lens, always run autofocus calibration in xTool Studio before the first job — the two lenses have different focal lengths and skipping recalibration produces uncorrectable out-of-focus results. Keep the K9 glass block from the inner engraving pack on hand for quick focal verification. For the AP2, clean the SuperCyclone module every 3 to 6 months; the cyclone windows let you inspect dust accumulation without disassembly.
Technical Specifications of the xTool F2 Ultra UV 5 W Laser Engraver Deluxe Bundle
Processing Capacity — F2 Ultra UV
| Laser Type | 5 W 355 nm UV Laser |
|---|---|
| Processing Mode | Laser Engraving, Laser Cutting |
| Supported Materials (Engravable) | Glass, Crystal, Acrylic, Wood, Metal, Leather, Plastic, Rubber, Silicone, Ceramic and more |
| Supported Materials (Cuttable) | Glass, Plastics (PE, PP, EVA, PET, etc.), Fabric, Leather, Acrylic (Not Fully Transparent), Paper, Wood, and More |
| Working Area (Inner Engraving) | 70 mm × 70 mm |
| Working Area (Surface Engraving) | 200 mm × 200 mm |
| Working Area (Surface Engraving with Conveyor) | 200 mm × 500 mm |
| Max. Working Speed | 15.000 mm/s |
| Max. Laser Cutting Capacity (Basswood) | 15 mm in Multiple Passes |
| Max. Laser Cutting Capacity (Acrylic) | 12 mm in Multiple Passes |
| Max. Processing Height | 150 mm |
| Max. Rotary Engraving Diameter | 150 mm |
Smart Software and Operation — F2 Ultra UV
| Supported Software | xTool Studio |
|---|---|
| Operating System | Windows / macOS |
Connection Meth
Recently viewed products
New
Brand: xTool
Product code: F2 Ultra UV Deluxe Bundle
The xTool F2 Ultra UV 5 W Laser Engraver Deluxe Bundle combines a 355 nm cold-process galvanometer laser with four precision accessories — the Auto St..
6 382€
Ex Tax:5 274€
Brand: Formlabs
Product code: 00-00001620
Grey Resin V5 3D Printing Resin for Form 4
The Grey Resin V5 photopolymer resin from Formlabs is a next-generation
universal resin, developed for..
120€
Ex Tax:99€
New
Brand: xTool
Product code: F2 Ultra UV Standalone
xTool F2 Ultra UV is a 5 W, 355 nm UV galvanometer laser
engraver built for micron-level precision engraving and cold-processing of
glass, crystal..
4 638€
Ex Tax:3 833€
Brand: Formlabs
Product code: 00-00001875
White Resin V5 Resin for the Formlabs Form 4 3D Printer
White Resin V5 is the new resin for the Form 4, Formlabs' next-generation
3D printer. A v..
120€
Ex Tax:99€
Brand: xTool
Product code: 13702-00000291
xTool F1 with Desktop Smoke Purifier – powerful laser engraver with air purification
xTool F1 with the Desktop Smoke Purifier is a portable galva..
1 478€
Ex Tax:1 221€
Brand: xTool
Product code: F2
The xTool F2 Portable Dual Laser Engraver is
a highly portable, industrial-grade dual-laser system,
designed to transform personalised eng..
1 511€
Ex Tax:1 249€
Brand: xTool
Product code: 00-00013030
xTool F2 Ultra – Standalone Metal Engraver with 1 Laser
The xTool F2 Ultra (single-laser) is equipped with a powerful 60 W
MOPA fibre laser (1064..
5 595€
Ex Tax:4 624€
Brand: xTool
Product code: 00-00013027
xTool F2 Ultra with Dual Laser – Precision on Any Surface
The xTool F2 Ultra with dual laser enables engraving on metal, wood, leather, plastic, and m..
7 277€
Ex Tax:6 014€
Brand: xTool
Product code: 00-00000291
xTool F1 Portable Laser Engraver
The xTool F1 portable galvanometer laser engraver opens up new possibilities for personalising objects of all kinds.
..
1 109€
Ex Tax:917€
New
Brand: xTool
Product code: F2 Slide Extension
The xTool F2 + Slide Extension Bundle is a portable
dual-laser engraver designed for small-business owners, craft fair vendors,
and on-site person..
1 713€
Ex Tax:1 416€
New
Brand: xTool
Product code: F2 Deluxe Bundle
xTool F2 Deluxe Bundle is a portable dual-laser engraving and cutting system designed for on-site personalization, small-batch production, and mobile ..
2 439€
Ex Tax:2 016€
New
Brand: xTool
Product code: F2 Ultra UV Standalone
xTool F2 Ultra UV is a 5 W, 355 nm UV galvanometer laser
engraver built for micron-level precision engraving and cold-processing of
glass, crystal..
4 638€
Ex Tax:3 833€
New
Brand: xTool
Product code: F2 Ultra UV Conveyor
xTool F2 Ultra UV with the
Auto Streamline™ Conveyor is a 5 W, 355 nm UV galvanometer
laser engraver bundle engineered for both micron-level preci..
5 122€
Ex Tax:4 233€
Brand: xTool
Product code: 00-00011634
xTool F1 Ultra Fibre & Diode Laser Engraver and Cutter
Introducing the xTool F1 Ultra – an outstanding new tool for creative individuals and small bus..
3 629€
Ex Tax:2 999€
Brand: xTool
Product code: 00-08800478
xTool M1 Ultra – Your Universal Assistant for DIY Projects
The world's first 4-in-1 multifunctional machine for DIY creativity — the xTool M1 Ultra — ..
1 644€
Ex Tax:1 359€
Brand: xTool
Product code: 6928819527164
Unlock the full potential of your xTool M1 Ultra system with the essential xTool M1 Ultra Ink Cartridge, meticulously engineered to integrate seamless..
36€
Ex Tax:30€
Brand: xTool
Product code: 0193122012119
Unlock endless creative possibilities in the world of
laser crafting with the comprehensive
Laser Material Exploration Kit (111 pieces).
Designe..
135€
Ex Tax:112€
Brand: xTool
Product code: 00-00000290
xTool M1 10W Hybrid Laser & Blade Cutter
The xTool M1 10W desktop hybrid laser and blade cutter — an innovative, powerful, and easy-to-use machine at ..
1 028€
Ex Tax:850€
Brand: xTool
Product code: 13668-00000290
xTool M1 10W Hybrid Laser & Blade Cutter
The xTool M1 10W desktop hybrid laser and blade cutter for everyone – an innovative, powerful, and easy-to-us..
1 747€
Ex Tax:1 444€
Brand: xTool
Product code: 13667-00000290
xTool M1 10W Hybrid Laser & Blade Cutter
The xTool M1 10W desktop hybrid laser and blade cutter for everyone – an innovative, powerful, and easy-to-us..
1 028€
Ex Tax:850€
Brand: xTool
Product code: F2
The xTool F2 Portable Dual Laser Engraver is
a highly portable, industrial-grade dual-laser system,
designed to transform personalised eng..
1 511€
Ex Tax:1 249€
Brand: xTool
Product code: 00-00013030
xTool F2 Ultra – Standalone Metal Engraver with 1 Laser
The xTool F2 Ultra (single-laser) is equipped with a powerful 60 W
MOPA fibre laser (1064..
5 595€
Ex Tax:4 624€
Brand: xTool
Product code: 00-00013027
xTool F2 Ultra with Dual Laser – Precision on Any Surface
The xTool F2 Ultra with dual laser enables engraving on metal, wood, leather, plastic, and m..
7 277€
Ex Tax:6 014€
Brand: xTool
Product code: 00-00000291
xTool F1 Portable Laser Engraver
The xTool F1 portable galvanometer laser engraver opens up new possibilities for personalising objects of all kinds.
..
1 109€
Ex Tax:917€
New
Brand: xTool
Product code: F2 Slide Extension
The xTool F2 + Slide Extension Bundle is a portable
dual-laser engraver designed for small-business owners, craft fair vendors,
and on-site person..
1 713€
Ex Tax:1 416€
New
Brand: xTool
Product code: F2 Deluxe Bundle
xTool F2 Deluxe Bundle is a portable dual-laser engraving and cutting system designed for on-site personalization, small-batch production, and mobile ..
2 439€
Ex Tax:2 016€
New
Brand: xTool
Product code: F2 Ultra UV Standalone
xTool F2 Ultra UV is a 5 W, 355 nm UV galvanometer laser
engraver built for micron-level precision engraving and cold-processing of
glass, crystal..
4 638€
Ex Tax:3 833€
New
Brand: xTool
Product code: F2 Ultra UV Conveyor
xTool F2 Ultra UV with the
Auto Streamline™ Conveyor is a 5 W, 355 nm UV galvanometer
laser engraver bundle engineered for both micron-level preci..
5 122€
Ex Tax:4 233€
Brand: xTool
Product code: 00-00011634
xTool F1 Ultra Fibre & Diode Laser Engraver and Cutter
Introducing the xTool F1 Ultra – an outstanding new tool for creative individuals and small bus..
3 629€
Ex Tax:2 999€
Brand: xTool
Product code: 00-08800478
xTool M1 Ultra – Your Universal Assistant for DIY Projects
The world's first 4-in-1 multifunctional machine for DIY creativity — the xTool M1 Ultra — ..
1 644€
Ex Tax:1 359€
Brand: xTool
Product code: 6928819527164
Unlock the full potential of your xTool M1 Ultra system with the essential xTool M1 Ultra Ink Cartridge, meticulously engineered to integrate seamless..
36€
Ex Tax:30€
Brand: xTool
Product code: 0193122012119
Unlock endless creative possibilities in the world of
laser crafting with the comprehensive
Laser Material Exploration Kit (111 pieces).
Designe..
135€
Ex Tax:112€
Brand: xTool
Product code: 00-00000290
xTool M1 10W Hybrid Laser & Blade Cutter
The xTool M1 10W desktop hybrid laser and blade cutter — an innovative, powerful, and easy-to-use machine at ..
1 028€
Ex Tax:850€
Brand: xTool
Product code: 13668-00000290
xTool M1 10W Hybrid Laser & Blade Cutter
The xTool M1 10W desktop hybrid laser and blade cutter for everyone – an innovative, powerful, and easy-to-us..
1 747€
Ex Tax:1 444€
Brand: xTool
Product code: 13667-00000290
xTool M1 10W Hybrid Laser & Blade Cutter
The xTool M1 10W desktop hybrid laser and blade cutter for everyone – an innovative, powerful, and easy-to-us..
1 028€
Ex Tax:850€
Don’t have an account yet?
|