3D Printer Raise3D RMS220 Standard Bundle

The 3D Printer Raise3D RMS220 Standard Package is a high-performance solution for businesses ready to scale from prototyping to short-run manufacturing. Designed for high-capacity Selective Laser Sintering (SLS), this system delivers a massive throughput of up to 5 kg per day, combining industrial-grade precision with a compact footprint ideal for optimising workshop layouts.

Unlocking industrial potential with the RMS220 series

The RMS220 is more than a printer; it is a complete production ecosystem designed to address the common pain points of Additive Manufacturing: speed, consistency, and post-processing. Using a 75 W infrared fibre laser and a high-precision galvanometer, the system reaches scanning speeds of up to 30,000 mm/s. For engineers and designers, this translates into parts with sharp edges, complex geometries, and robust mechanical properties that rival injection moulding. Whether you are producing press-fit housings, medical guides, or durable end-use components, the RMS220 maintains tight tolerances with a layer height range of 0.05 to 0.40 mm.

Efficiency and continuous workflow

Productivity is at the core of the 3D Printer Raise3D RMS220 Standard Package. The system features a modular design centred on the Build Unit 220. Unlike traditional SLS machines that require lengthy cooling periods inside the printer, the RMS220 allows you to remove the build unit once printing is complete for external cooling. The build unit cools to below 100 °C in just 30 minutes. This "Swap and Print" capability ensures the printer's laser is rarely idle; you can immediately insert a second build unit to begin the next batch, maximising ROI (return on investment).

Advanced thermal control and material versatility

Dimensional accuracy in SLS printing depends heavily on thermal stability. The RMS220 employs a 4-zone IR heating system with auto-calibration that eliminates temperature fluctuations across the entire build platform. This prevents the warping often associated with high-temperature plastics. The machine is compatible with a wide range of industrial materials, including Raise3D PA12 for balanced mechanical performance, impact-resistant PA11, and flexible elastomers such as TPU90A and TPU86A. In addition, the integrated RFID material management system automatically identifies the loaded powder, adjusting parameters for optimal results and simplifying material tracking.

Optimised post-processing

The Standard Package includes the Cleaning Station C220-P, which transforms the typically complex SLS powder recovery process into a clean, semi-automated workflow. This unit integrates powder separation, recovery, and preparation, reducing hands-on time per print cycle to just 20–45 minutes. A single operator can comfortably process over 50 kg of parts per shift, thanks to ergonomic features such as the adjustable armrest and transparent safety covers. This efficiency dramatically reduces the total cost of ownership (TCO) compared to traditional industrial SLS systems.

Technical specifications of the 3D Printer Raise3D RMS220 Standard Package

• Printer with Build Unit 220
• Cleaning Station C220-P
• One-year warranty

General System Overview

• Technology: Selective Laser Sintering (SLS)
• Maximum throughput: up to 5 kg/day at full capacity
• Build volume (W × D × H): 220 × 220 × 350 mm (8.7 × 8.7 × 13.8 inches) / 17 L
• Laser type: 75 W infrared fibre laser, wavelength 1064 nm
• Scanning system: high-speed, high-precision galvo system with F-theta lens
• Maximum scanning speed: 30,000 mm/s
• Print speed: 2.2 L/h (at a packing density of 20% by weight)
• Layer height: 0.05–0.40 mm (0.1–0.2 mm recommended for greater stability)

Temperature and Environmental Control

• Maximum powder temperature: 220 °C
• Maximum platform temperature: 180 °C
• Maximum cylinder temperature: 180 °C
• Active cooling: yes
• Atmosphere: air / nitrogen (integrated nitrogen generator in RMS220; requires compressed air)
• Operating environment: temperature 15–30 °C; humidity 30–70% RH without condensation

Hardware and Physical Dimensions

• RMS220 printer dimensions: 861 × 685 × 1560 mm (body); 861 × 685 × 1760 mm (with light tower)
• RMS220 printer net weight: 283 kg (without powder or container)
• Cleaning Station C220-P dimensions: 1238 × 823 × 1740 mm (body); 1384 × 823 × 1928 mm (incl. panel and light)
• Cleaning Station C220-P net weight: 263 kg
• Build Unit 220 dimensions: 536.5 × 333 × 1005 mm
• Build Unit 220 net weight: 62 kg
• Hopper capacity (printer): 31.5 L (40 L with extension box)
• Hopper capacity (cleaning station): 20 L new powder / 20 L used powder

Software and Controls

• Slicer software: ideaMaker
• Supported input formats: STL, OBJ, 3MF, OLTP, STEP, STP, IGES, IGS
• User interface (printer): 11.5-inch touchscreen (resolution 2560 × 1600)
• User interface (cleaning station): 7-inch touchscreen (resolution 1280 × 800)
• Logic controller: Rockchip RK3568 Arm Quad Cortex-A55 2GHz
• Motion controller: GigaDevice Arm Cortex-M4 200MHz FPU
• Operating system: LINUX

Materials

• Compatible powders: PA12 Black, PA11 Black, PA12 GB Black, TPU90A (Black/White), TPU86A (Black/White)
• Open Material Programme (OMP): compatible with selected third-party materials; optional open material licence available
• RFID material recognition: yes (both on the printer and the cleaning station)

Connectivity and Power

• Printer input power: 200–240 VAC, 50/60 Hz, 230 VAC @ 15 A
• Cleaning station power: 200–240 V @ 8 A or 100–120 V @ 16 A (includes external vacuum)
• Network: Wi-Fi, LAN/Ethernet
• Interfaces: USB 3.0 × 1, Ethernet × 1

Why buy from EXPERT3D?

We have been providing professional 3D printing solutions since 2012, helping businesses implement efficient Additive Manufacturing workflows. As an official Raise3D representative, we guarantee the best price, authorised technical support, and an official warranty for your equipment.