- Stock: In stock
- Product code: 920372000001458853
- Weight Brutto: 35.00kg
AgiBot C2P is a cleaning robot for commercial premises that combines four cleaning modes. Unlike single-purpose machines, it selects the mode itself for each surface. The automatic docking station refills water and cleans the roller without operator involvement. The cloud platform allows remote control of cleaning tasks.
Key features and benefits
- Cleaning performance: 300-700 m²/h — This range covers a supermarket floor in a single shift, so staff don't waste time manually finishing large areas.
- Mopping mode runtime: 4 h. (2 h. of continuous operation with a full water tank) — One tank fill is enough for two hours of continuous mopping, and the overall runtime covers a night shift without extra staff intervention.
- Noise level in wet mode: below 60 dB — This is quieter than a low-voiced conversation, so night-time cleaning in a hotel or office doesn't disturb people nearby.
- Obstacle clearance: 30 mm, 8° — The robot crosses door thresholds and climbs shopping centre ramps without getting stuck or requiring manual carrying.
- Four cleaning modes in a single pass: AgiBot C2P automatically switches between sweeping, vacuuming, dry wiping and wet wiping. This means one robot replaces several single-purpose machines and reduces cleaning staff numbers.
- Docking station with lift and access-control integration: charging, water refilling and draining, and roller self-cleaning all take place without an operator. Lift access allows cleaning of several floors without staff escort.
How AgiBot C2P works
Automatic mode selection
AgiBot C2P determines the floor type using sensors beneath its chassis. It independently chooses one of four modes: sweeping, vacuuming, dry wiping or wet wiping. Automatic carpet detection switches the robot to dry mode without operator involvement, eliminating the risk of damaging the pile with a wet brush.
Navigation around obstacles
In premises with densely arranged furniture, such as clothing boutiques or showrooms, the navigation system plots a route past shelving units and mannequins. It does this without interrupting the cleaning cycle.
Design and maintenance
Docking station
The docking station performs a full maintenance cycle: it automatically charges the battery, fills the tank with clean water, drains dirty water and cleans the mopping roller. The robot returns to the station on its own, so the cleaning schedule isn't interrupted for manual maintenance.
Mobile water cart
For premises where plumbing installation isn't possible, a mobile water cart is provided. It connects to the robot and expands the range of areas suitable for mopping without building modifications.
Body design
The housing combines a rounded upper unit with a display and a cylindrical lower section, which houses the tanks and brushes.
Software and automation
Cloud platform
The cloud platform manages cleaning tasks remotely and generates multidimensional analytics with data visualisation. This means a dispatcher can see the status of all robots on a site from a single screen.
Building infrastructure integration
Integration with lifts and access-control systems allows the robot to move independently between floors and through controlled doors. This happens without escort from security or technical staff.
Safety and movement limitations
Quiet mode
Wet cleaning mode operates below 60 dB, so the robot can be run at night in hotels and offices without disturbing people nearby.
Obstacle clearance
The robot overcomes obstacles up to 30 mm high and climbs slopes up to 8°. The distance to the floor edge is less than 50 mm, which prevents falls from stairs or raised platforms.
Applications
In hotels and business centres with marble or tiled flooring, AgiBot C2P combines quiet wet mode with the hardness of the surface. This means cleaning goes unnoticed by guests.
- Supermarkets: the robot covers up to 700 m²/h of sales floor, so cleaning takes place at night without interrupting daytime trading.
- Office buildings: integration with lifts and access-control systems allows cleaning of several floors without security escort.
- Hotels and apartments: wet cleaning mode below 60 dB doesn't disturb guests at night, and compatibility with marble flooring eliminates the risk of scratches.
- Retail shops: a cleaning width of 390 mm and an edge distance of less than 50 mm allow narrow aisles between shelving units to be cleaned without damaging merchandise.
- Showrooms: automatic detection of carpet runners and hard flooring removes the need for manual mode switching during product displays.
- Office lobbies: the mobile water cart makes it possible to mop floors in areas without fixed plumbing, expanding the range of premises suitable for cleaning.
Compatible floor types
AgiBot C2P works on four types of flooring commonly found in commercial premises.
- Carpet: automatic detection of pile flooring switches the robot to dry mode without manual configuration.
- Marble: quiet wet cleaning mode below 60 dB is safe for the polished surfaces of hotel lobbies.
- PVC: the hard surface withstands a full mopping cycle with a scrubbing brush.
- Tile: a standard surface for daily wet cleaning in sales areas and offices.
Technical specifications
Dimensions and weight
| Parameter | Value |
| Overall dimensions | 520 × 510 × 680 mm |
| Total weight | 22.5 kg |
| Minimum clearance height | 700 mm |
| Obstacle clearance height | 30 mm |
| Distance to edge | <50 mm |
Cleaning performance
| Parameter | Value |
| Operating speed | 0.4-0.6 m/s |
| Cleaning performance | 300-700 m²/h |
| Cleaning width | 390 mm |
| Slope-climbing capability | 8° |
Tanks and dust container
| Parameter | Value |
| Dust container capacity | 1.3 L |
| Dust container volume | 1.3 L |
| Dirty water tank capacity | 3.5 L |
| Clean water tank capacity | 4 L |
Battery and charging
| Parameter | Value |
| Battery specifications | 23 Ah |
| Mopping mode runtime | 4 h. (2 h. of continuous operation with a full water tank) |
| Charging time | 2 h. |
Why buy AgiBot C2P from EXPERT3D?
EXPERT3D has been supplying professional 3D equipment since 2012. Our engineers help select the right AgiBot C2P configuration for your site and calculate cleaning performance for your area. Warranty service covers the robot's entire service life. We deliver throughout Spain and EU countries. Order original consumables and spare parts on the website: we deliver everything promptly so your equipment doesn't stand idle.
AgiBot C2P is a cleaning robot for commercial premises that combines four cleaning modes. Unlike single-purpose machines, it selects the mode itself for each surface. The automatic docking station refills water and cleans the roller without operator involvement. The cloud platform allows remote control of cleaning tasks.
Key features and benefits
- Cleaning performance: 300-700 m²/h — This range covers a supermarket floor in a single shift, so staff don't waste time manually finishing large areas.
- Mopping mode runtime: 4 h. (2 h. of continuous operation with a full water tank) — One tank fill is enough for two hours of continuous mopping, and the overall runtime covers a night shift without extra staff intervention.
- Noise level in wet mode: below 60 dB — This is quieter than a low-voiced conversation, so night-time cleaning in a hotel or office doesn't disturb people nearby.
- Obstacle clearance: 30 mm, 8° — The robot crosses door thresholds and climbs shopping centre ramps without getting stuck or requiring manual carrying.
- Four cleaning modes in a single pass: AgiBot C2P automatically switches between sweeping, vacuuming, dry wiping and wet wiping. This means one robot replaces several single-purpose machines and reduces cleaning staff numbers.
- Docking station with lift and access-control integration: charging, water refilling and draining, and roller self-cleaning all take place without an operator. Lift access allows cleaning of several floors without staff escort.
How AgiBot C2P works
Automatic mode selection
AgiBot C2P determines the floor type using sensors beneath its chassis. It independently chooses one of four modes: sweeping, vacuuming, dry wiping or wet wiping. Automatic carpet detection switches the robot to dry mode without operator involvement, eliminating the risk of damaging the pile with a wet brush.
Navigation around obstacles
In premises with densely arranged furniture, such as clothing boutiques or showrooms, the navigation system plots a route past shelving units and mannequins. It does this without interrupting the cleaning cycle.
Design and maintenance
Docking station
The docking station performs a full maintenance cycle: it automatically charges the battery, fills the tank with clean water, drains dirty water and cleans the mopping roller. The robot returns to the station on its own, so the cleaning schedule isn't interrupted for manual maintenance.
Mobile water cart
For premises where plumbing installation isn't possible, a mobile water cart is provided. It connects to the robot and expands the range of areas suitable for mopping without building modifications.
Body design
The housing combines a rounded upper unit with a display and a cylindrical lower section, which houses the tanks and brushes.
Software and automation
Cloud platform
The cloud platform manages cleaning tasks remotely and generates multidimensional analytics with data visualisation. This means a dispatcher can see the status of all robots on a site from a single screen.
Building infrastructure integration
Integration with lifts and access-control systems allows the robot to move independently between floors and through controlled doors. This happens without escort from security or technical staff.
Safety and movement limitations
Quiet mode
Wet cleaning mode operates below 60 dB, so the robot can be run at night in hotels and offices without disturbing people nearby.
Obstacle clearance
The robot overcomes obstacles up to 30 mm high and climbs slopes up to 8°. The distance to the floor edge is less than 50 mm, which prevents falls from stairs or raised platforms.
Applications
In hotels and business centres with marble or tiled flooring, AgiBot C2P combines quiet wet mode with the hardness of the surface. This means cleaning goes unnoticed by guests.
- Supermarkets: the robot covers up to 700 m²/h of sales floor, so cleaning takes place at night without interrupting daytime trading.
- Office buildings: integration with lifts and access-control systems allows cleaning of several floors without security escort.
- Hotels and apartments: wet cleaning mode below 60 dB doesn't disturb guests at night, and compatibility with marble flooring eliminates the risk of scratches.
- Retail shops: a cleaning width of 390 mm and an edge distance of less than 50 mm allow narrow aisles between shelving units to be cleaned without damaging merchandise.
- Showrooms: automatic detection of carpet runners and hard flooring removes the need for manual mode switching during product displays.
- Office lobbies: the mobile water cart makes it possible to mop floors in areas without fixed plumbing, expanding the range of premises suitable for cleaning.
Compatible floor types
AgiBot C2P works on four types of flooring commonly found in commercial premises.
- Carpet: automatic detection of pile flooring switches the robot to dry mode without manual configuration.
- Marble: quiet wet cleaning mode below 60 dB is safe for the polished surfaces of hotel lobbies.
- PVC: the hard surface withstands a full mopping cycle with a scrubbing brush.
- Tile: a standard surface for daily wet cleaning in sales areas and offices.
Technical specifications
Dimensions and weight
| Parameter | Value |
| Overall dimensions | 520 × 510 × 680 mm |
| Total weight | 22.5 kg |
| Minimum clearance height | 700 mm |
| Obstacle clearance height | 30 mm |
| Distance to edge | <50 mm |
Cleaning performance
| Parameter | Value |
| Operating speed | 0.4-0.6 m/s |
| Cleaning performance | 300-700 m²/h |
| Cleaning width | 390 mm |
| Slope-climbing capability | 8° |
Tanks and dust container
| Parameter | Value |
| Dust container capacity | 1.3 L |
| Dust container volume | 1.3 L |
| Dirty water tank capacity | 3.5 L |
| Clean water tank capacity | 4 L |
Battery and charging
| Parameter | Value |
| Battery specifications | 23 Ah |
| Mopping mode runtime | 4 h. (2 h. of continuous operation with a full water tank) |
| Charging time | 2 h. |
Why buy AgiBot C2P from EXPERT3D?
EXPERT3D has been supplying professional 3D equipment since 2012. Our engineers help select the right AgiBot C2P configuration for your site and calculate cleaning performance for your area. Warranty service covers the robot's entire service life. We deliver throughout Spain and EU countries. Order original consumables and spare parts on the website: we deliver everything promptly so your equipment doesn't stand idle.
